Miniatures pt156 – Halflings
Nasty little hobbitses printed in FDM in 15mm scale. Brite Minis sculpts. They’re more round than my other halflings so they’re closer to hobbits.
Updates from December, 2025 Toggle Comment Threads | Keyboard Shortcuts
-
giorgis
Halfling swordsman Halfling crossbowman Halfling archer Halfling archer Halfling farmer Kettle Knight -
giorgis
Miniatures pt155 – Elves
I’ve painted more of the Brite Minis I had printed in 15mm scale. This time various Elves. A couple wood elf archers, a couple high elf warriors and several adventurer type elves (sorcerer, mage, mercenary, bard).
The wood elf scheme was close to my previous wood elves I had painted from Demonworld. Went with light greens, and red accessories.
For the High elves I went with a white and red scheme (wanted pink but guess I missed the mixing of paints in proper ratio, so I just went with it).
For the adventurers I focused on vermillion and turquoise with some variations.
Printing was okay bar the sorcerers staff head which was corrupted during printing so I turned it into a flame.
Wood elves 
High Elves 
Elf magic users 
Elf adventurers -
giorgis
Miniatures pt154 – Peasants, Villagers and Townsfolk
Continuing with a selection from Brite Minis, here are a few peasants, villagers and townsfolk ready to defend their land.
Scaled 60% for 15mm. Supportless models from Brite Minis. Printed on a Bambu Labs A1 mini with a 0.2mm nozzle. eSun PLA+HS Filament. 0.06mm layer height. High Quality default presets.
Halfling butcher 
Baker 
Townsfolk with rolling pin 
Villager with club 
Archer woman 
Peasant archer 
Peasant archer 
Peasant Spearman -
giorgis
Miniatures pt153 – Mycenaean Orcs
Or rather orcs in historically accurate Mycenaean armour. Brite Minis sculpts, printed in 15mm scale, FDM.
Orc party 
Orc heavy with axe 
Orc heavy with axe 
Orc heavy with hammer 
Orc heavy leader 
Orc shaman witch -
giorgis
Miniatures pt152 – Town Guard
I’ve been tampering with print settings a while now, but I don’t want this post to be another 3d printing guide. I’ll just give settings and information and proceed to the miniatures painting stuff. Perhaps I will make a separate 3d printing post later in the future.
I’ve collected several town-guard style sculpts from the Brite Minis catalogue.
Scaled 60% for 15mm. Supportless models. Printed on a Bambu Labs A1 mini with a 0.2mm nozzle. eSun PLA+HS Filament. 0.06mm layer height. High Quality default presets.
For paint scheme I went with a mix of earth tones (browns for leathers, gambesons, wood) and a Green (Permanent Green Light) and Yellow (Azo Yellow Medium) for the uniforms (capes, overcoats, pants, shirts). I free handed a tower in the shield with a Yellow/Green background.
I spent the extra time for details like moustaches, beards and buckles as needed. Overall I really like the end results, and will be proud to field them alongside my Blighthaven Town Guard.
Spearman Guard Captain 
Townguard 
Hornblower 
Drummer 
Spearman 
Man at arms 
Man at arms 
Man at arms 
Man at arms 
Spearman 
Onibaba are discussing. 
Solo, Pen, Paper and Dice 
Reply